1999 - 2002, Toyota 4Runner Have a broken or cracked headlight? Replace them and save a fortune by not going to the dealer. Fully plug & play installation makes for an easy install. These new lights come directly from the same manufacturer that makes your original headlights.
To install the lights you first need to remove the grille. Rather than try to unclip the grille from looking over on top, look at it face forward. If you look at it at this angle and look underneath the grille, you will see a series of lever like clips. You will see 3 on the top, 2 in the middle and 3 on the bottom. You can use a flathead screwdriver to push down on these clips, and the grille will come off very easily. The trick is just getting just the right tension--too much and the tabs are hard to depress--too little and they snap right back in the locked position. Inserting a toothpick in the clips after they are depressed is a good trick and makes this a snap.
Once the grille is removed, you need to remove the screws from your old headlights. Remove the screw that holds the bottom metal sill plate. Instead of removing the sill completely, you can swing it away from you to get to the hidden screw behind it, which also holds the headlight in place. Now install the new lights in reverse order.
These lenses sell for over $215 EACH from your dealer, and a PAIR would wind up costing you $435! Our buy direct pricing will save your wallet!
Price below is for one headlight.
Will ship in aprox. 7-10 days after order is placed.
Jason Burtman's 4Runner Limited Reg. Price: $159.99 Our Price: $ 69.99 |